Weichai WP9H336E50 300-400HP truck engine
Weichai Diesel Engine

Weichai WP9H336E50

Weichai WP9H336E50 diesel engine: 247 kW @ 1900 rpm, 1600 Nm @ 1000-1400 rpm, 8.8 L, Euro V. For port tractors and 8×4 cargo trucks. Shipped worldwide.

WhatsApp Us

Introduction

A new-generation Weichai engine meeting Euro V/VI emission standards, used in port tractors.

Features

High reliability

  • Heavily reinforced design with a large safety margin: more than 15,000 hours of bench testing and more than 50 million km of road testing.
  • Service life above 1.8 million km or 30,000 hours.

Modular design

  • Integrated modules cut the part count by more than 30%.
  • Fuel filter module combines the primary and fine filters.
  • Oil filter module combines the oil filter, oil cooler, centrifugal filter and coolant filter.
  • One-piece cylinder head with an integrated intake manifold keeps the engine compact.

Lightweight design

  • Complete engine weighs only 805 kg, optimized by CAE analysis without giving up strength or reliability.

Intelligent control

  • Weichai's own ECU, developed in-house, with fast, high-precision air-system control.
  • Multi-level control strategy for overall performance.

Low noise and vibration

  • Noise below 96 dB(A) at 1 m at the rated power point; the drum-shaped block skirt is strong and low in vibration, which greatly reduces noise.
  • Rear gear train with high-precision scissor gears runs steadily and further reduces mechanical noise.
  • Multiple-injection technology significantly reduces combustion noise.

Powerful

  • A smaller rear-axle ratio can be used without loss of performance, further reducing fuel consumption.

Low fuel consumption

  • Minimum fuel consumption of 181 g/(kW·h).
  • The economical low-speed range covers typical truck operating speeds.

Adaptability

  • No power loss at 2,800 m altitude, and very low power loss at 4,500 m under typical operating conditions.
  • Starts reliably at -20°C.

Main Parameters

Model WP9H336E50
Power / speed (kW / rpm) 247/1900
Max torque / speed (Nm / rpm) 1600/1000-1400
Displacement (L) 8.8
Emission standard Euro V
Fuel system common rail + SCR
Air intake Turbocharged and intercooled
Applications port tractor/8×4 Cargo truck/8×4 dump truck/mixer truck, etc.

Rebuild or replace?

Tell us the hours and the symptoms — we'll quote both options for the WP9H336E50.

WhatsApp Us

Request a Quote

Fields marked * are required, plus an email address or a phone / WhatsApp number.

Your details are used only to answer this inquiry. Privacy notice